Protect 1216i Wireless Spy Camera Scanner Hidden Bugs Finder

Protect 1216i Wireless Spy Camera Scanner Hidden Bugs Finder

Additional Savings

Get a doscount when you buy bulk

Wireless Spy Camera Video Scanner

 

This is a high-quality and professional Wireless Camera Detector with   scanning. Do you have the feeling that somebody is watching you? If you ever seen a car close to you at night that takes the same turns and Roads that you do for longer than would be appropriate? That is a questionable situation and we have the right type of devices to keep you safe from spying ears and eyes. This device has LCD screen so you can see everything going on with the counter surveillance bat your assailant is doing. it has an acoustic mode that warns you and a quiet spy camera detection mode. it is very simple for any user even if you are not tech Savvy to use this device. You turn the device on and it begins to scan immediately upon powering up.

 

The iProtect 1216 is a new professional RF detector created for discovering all types of RF eavesdropping devices, including analog and digital, as well as those that transmit information over mobile networks and using wireless standards


Key Features

3-band detection The frequency range of the 1216 has been split into 3 parts, each displayed by a separate bargraph: "VHF/UHF 50-700 MHz", "Mobile and wireless 700 MHz — 3 GHz. and "Microwave and wireless 3-12 GHY. The separate indication allows the operator to understand better what type of signal is detected, to detect several signals at the same time and to sustain the ability of detection near the sources of interference. While the general sensitivity of a typical near-field receiver/RF detector drops near any interference, the iProtect 1216 decreases the sensitivity on just one band and maintains a high sensitivity on others

Microwave The third "microwave" band of the iProtect 1216 covers the 3-12 GHz frequency range. This band detects Wi-Fi and other wireless protocols operating at 5 GHz and on any higher frequencies. The microwave frequencies are supposed to be more covert since they are not detectable by common RF detectors. The iProtect 1216 finds these signals easily. In order to reduce the attenuation in cables the microwave circuitry of the 1216 is laated directly in the microwave antenna's housing


Alarm Despite the recommendation to deactivate any known and safe radio devices like VVi-Fi access poi., wireless devices, mobile phones and cordless phones before a bug sweep, sometimes interference can come from adjacent rooms and causes false detections. In this case the Alann feature helps the operator to reject background interference by adjusting the threshold. When a signal exceeds the alarm threshold the device produces an aleMng sound. The Alarm is also extremely convenient when probing hard-to-access places or keeping the device in the "guarding" state. The alarrn threshold has 48 tuning steps


Histogram In the ONE BAND display mode the iProtect 1216 shows the histogram for the selected band in addition to the bargraph. The histogram draws the history of the signal obtained over the last 5 seconds and is very informative when observing intemlittent/periodical signals or when probing the area quickly


Wi-Fi and 4G 3G The iProtect 1216 has a significantly higher sensitivity to the 4G, 3G, Wi-Fi and Bluetooth bugging devices compared to conventional RF detectors. This advantage was achieved with the help of the additional radio frequency paths in the circuit dedicated to the specific frequency spans. Therefore Wi-Fi, Bluetooth and a number of other wireless protocols operating within the 2.4/5GHz bands are detected at an increased distance

Signature In addition to drawing a bargraph the iProtect 1216 can identify some types of signals and show a corresponding message on the display. By combining information coming from the extra RF paths and from the audio signature the 1216 identifies the following signals: cordless DECT device in an "idle" state, active DECT device, GSM, 4G, 3G, Wi-Fi/Bluetooth

 

It is so high-tech that it has range from 50Mhz to 12GHz scanning technology for your protection. There's two frequency bands for scanning the area.

This device has a built-in li-ion battery with built-in speakers There is a separate antenna for each signal of the 2 bands of frequencies. There's also a mode to save your battery life so it lasts longer for you

 



Features:


  • Detects all types of RF transmissions including analog and digital, audio and video
  • Frequency range 50 MHz – 12 GHz
  • Separation into 3 bands helps to avoid loss of sensitivity near strong interference
  • ALL BANDS and ONE BAND display modes
  • High sensitivity to 4G, 3G and wireless protocols (Wi-Fi, Bluetooth, etc.)
  • Working modes: SILENT, AUDIO and ALARM
  • Adjustable alarm threshold
  • Portable, reliable and easy-to-use
  • The BARGRAPH shows the momentary RF level
  • The HISTOGRAM displays the RF signal over 5 seconds (in 'ONE BAND' display mode)
  • The SIGNATURE displays the possible signal type
  • Built-in directed microwave antenna
  • Shock-resistant CNC milled duralumin housing
  • Rechargeable Li-Ion battery with resource of 6 hours
  • Controlled by micro controllers
  • 2 x built-in OLED displays
  • Built in Rechargeable Li-Ion battery
  • Built in speaker
  • Separate antenna for each of the 2 bands
  • Power saver mode

 


Battery

  • The iProtect 1216 has a built-in rechargeable battery providing a resource of up to 6 hours.
  • As the battery becomes discharged the corresponding label on the status display will change:
  • OK– fully charged

MED. – charged 30-80%

LOW. – less than 30% left

  • The 1216 will turn off automatically when its battery is discharged to the crucial level.
  • You can recharge the detector from any USB port, including of the laptop, cell phone charger or car USB adapter.
  • Recharging time is 4 hours.
  • The detector can be operated during recharging


 

Specifications:

 

  • Frequency range
  • 50 MHz – 12 GHz
  • Band 1: 50 – 700 MHz
  • Band 2: 700 MHz – 3 GHz
  • Band 3: 3GHz – 12 Ghz
  • Indicators:  Main display, Status display
  • Display modes ALL BANDS, ONE BAND
  • Working modes: SILENT, AUDIO, ALARM
  • RF connector: SMA (band 1 and 2), 50 Ohm
  • Microwave antenna: Built-in (band 3)
  • Threshold settings: 48 steps
  • Battery: Rechargeable Li-Ion 1150mAh@3.7V
  • Battery resource:6 hours
  • Recharge time:4 hours
  • Recharge source:USB
  • Dimensions with antennas: 173 x 71 x 21 mm
  • Weight: 265 g
  • Operating temperature:-10° C to 45° C


 Packaging:


  • detector
  • 2 x antennas
  • manual

 

Dash Cameras
1920x1080P

Write a review

Note: HTML is not translated!
    Bad           Good

Shipping

Express Postage from Sydney available

  • Views: 11012
  • Brand: VIMEL
  • Product Code: MAS-WIFINDER
  • Reward Points: 100
  • Availability: In Stock
  • $1,175.00
  • Ex Tax: $1,068.18
  • Price in reward points: 400

Tags: Protect 1216i, spy camera detector, spy scanner, hidden cameras detector, spy finder, listening devices finder, GPS tracker detector