









- Stock: In Stock
- Model: SOEKS-IMPULSE
- Weight: 450.00g
- Dimensions: 18.00cm x 18.00cm x 6.00cm
Soeks Impulse Electromagnetic Field (EMF) Meter
Buy from official distributor Securitylab: English version, English manual and Sydney stock.
The daily used home appliances radiating electromagnetic waves. The scientific research proves that electromagnetic waves cause many health issues to the human. Even though scientist divided into two categories like most harmful and dangers issues caused by electromagnetic fields. It is very important to measure electromagnetic radiations in your house. For this purpose only we designed the special impulse pocket EMF indicator. This indicator will find out the hidden electricity leaks in cables, wires etc even if you do not get any aware of magnetic and electric fields. Electromagnetic radiations can be measured with an outstretched arm at a certain distance of 50 cm from the floor and 20 cm from the walls. You can easily find out the measurements in the residential areas at the distance of 1-2 m from the home appliances. The first step is to switch on and then switch off the appliances to measure radiations. This indicator is very simple to use and find the radiations.
The SOEKS Impulse identifiers will help to identify the place with higher electromagnetic fields in the residential area like gardens, backyards, etc, the residential properties like apartments, residential buildings, offices etc, or other household appliances like TV, personal computer, mobile phones etc. The indicator can be used to indicate the area with high magnetic or electric field intensity. The electromagnetic fields are generated by the wiring, household appliances, concentrations of electrical devices, transmission networks, industrial facilities, near homes etc. The indicator will find out the hazardous household appliances.
The impulse electromagnetic field indicator is mainly designed to monitor compliances with electromagnetic safety standards. It identifies the magnetic and electric field areas. The Impulse indicator also identifies the direction of the electromagnetic field and it source. This will also give the audio alert when reaching certain fixed levels of emission.
- 2D/3D directivity graph, thanks to which you can identify the source of electromagnetic radiation.
- the indicator shows the estimated cycles of emitted signal, which helps to determine the nature of the radiation.
- the display of the electromagnetic activity history over the last minute.
- audio warning when reaching a certain emitting power threshold.
- works from two AAA batteries or NiMh AAA batteries, as well as from USB.
The Soeks Impulse Electromagnctic Field (EMF) Intensity Meter is intended for:
- Express analysis of electromagnetic fields in various living spaces, residential areas and PCs
- Detection of electromagnetic radiation sources
- Localization of hidden electric wiring (in walls, furniture, etc.)
- Identifying the most favorable residential areas for humans and animals alike
Specification |
|
Device version |
NUC-078 V4 |
Measurable electromagnetic field frequency |
from 20 to 2,000 |
Measurement range of magnetic field |
from 0.04 to 12 |
Measurement range of magnetic field |
from 0.08 to 20 |
Maximum permissible relative error of |
±30 |
Hardware nonlinearity of measurement of |
7.0 |
Measurement range of electric field |
from 10 to 1,000 |
Maximum permissible relative error of |
±30 |
Hardware nonlinearity of measurement of |
2.0 |
Measurement rate, samples per second |
2 |
Batteries |
Rechargeable batteries or AAA batteries |
Overall dimensions height x width x thickness, mm. |
105x48x19 |
Products weight (minus batteries), gr. |
60 |
Display |
Color TFT, 128x160 |
Operating temperature range, oC |
from -20 to +45 |
Soeks Impulse base kit includes the following items:
- Soeks Impulse
- User manual
- 2 batteries (AAA)
- Rigid paperboard box